BKBHM - PRESTONE SUPER HEAVY DUTY BRAKE FLUID
- MSDS: BKBHM
- Manufacturer: FIRST BRANDS CORP
- Product Name: PRESTONE SUPER HEAVY DUTY BRAKE FLUID
- National Stock Number: 2990-00B060020
Product Identification
Product ID:PRESTONE SUPER HEAVY DUTY BRAKE FLUID
MSDS Date:02/12/1991
FSC:2990
NIIN:00B060020
MSDS Number: BKBHM
Responsible Party
DANBURY, CT 06813-1911
US
Emergency Phone: 1-800-424-9300
Info Phone: 1-800-424-9300
Cage: DO273
Contractor
Telephone: 203-731-2300, CHEMTREC 800-424-9300
Cage: 61014
Ingredients
ETHOXYTRIGLYCOL
CAS: 112-50-5
Fraction By Weight: >1%
METHOXYTRIGLYCOL
CAS: 112-35-6
Fraction By Weight: >1%
TETRAETHYLENE GLYCOL
CAS: 112-60-7
Fraction By Weight: >1%
PENTAETHYLENE GLYCOL
CAS: 4792-15-8
Fraction By Weight: >1%
HEXAETHYLENE GLYCOL
CAS: 2615-15-8
Fraction By Weight: >1%
2-(2-METHOXYETHOXY) ETHANOL
CAS: 111-77-3
Fraction By Weight: >1%
2-(2-BUTOXYETHOXY) ETHANOL
CAS: 112-34-5
Fraction By Weight: >1%
DIETHYLENE GLYCOL
CAS: 111-46-6
Fraction By Weight: 4-8%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Health Hazards Acute and Chronic:ACUTE: SWALLOWING MAY CAUSE NAUSEA.
THERE IS NO EVIDENCE OF ADVERSE EFFECTS FROM SKIN ABSORPTION OR
CONTACT, OR INHALATION. EYE CONTACT MAY CAUSE IRRITATION, SEEN AS
EXCESS REDNESS AND POSSIBLE SWEL LING OF THE CONJUNCTIVA. NO
CHRONIC HEALTH HAZARDS SPECIFIED BY MANUFACTURER.
Effects of Overexposure:OVEREXPOSURE TO VAPORS GENERATED AT HIGH
TEMPERATURES MAY RESULT IN EYE AND RESPIRATORY TRACT IRRITATION AND
IN THE INHALATION OF HARMFUL AMOUNTS OF MATERIAL.
Medical Cond Aggravated by Exposure:A KNOWLEDGE OF THE AVAILABLE
TOXICOLOGY INFORMATION AND OF THE PHYSICAL AND CHEMICAL PROPERTIES
OF THE MATERIAL SUGGEST THAT OVEREXPOSURE IS UNLIKELY TO AGGRAVATE
EXISTING MEDICAL CONDITIONS.
First Aid
First Aid:INGESTION: GIVE AT LEAST 2 GLASSES OF MILK OR WATER AND
INDUCT VOMITING, UNLESS THE PATIENT IS UNCONSCIOUS. CALL A
PHYSICIAL. SKIN: WASH WITH SOAP AND WATER. INHALATION: REMOVE TO
FRESH AIR. EYES: FLUSH WITH WATER FOR SEVERAL MINUTES. SEEK
MEDICAL ATTENTION FOR DISCOMFORT. THERE IS NOT SPECIFIC ANTIDOTE.
TREATMENT OF OVEREXPOSURE SHOULD BE DIRECTED AT THE CONTROL OF
SYMPTOMS AND CONDITION.
Fire Fighting
Flash Point Method:COC
Flash Point:270F,132C
Extinguishing Media:WATER FOG, FOAM, ALCOHOL FOAM, CO2 AND DRY
CHEMICAL.
Fire Fighting Procedures:AVOID STRONG OXIDIZING AGENTS AND TEMPERATURES
IN EXCESS OF 300C. USE SCBA IN CONFINED SPACE AREA.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:WEAR SUITABLE PERSONAL PROTECTIVE EQUIPMENT.
COLLECT FOR DISPOSAL. LARGER SPILLS MAY BE ABSORBED ON VERMICULITE
OR OTHER SIMILAR MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID EYE CONTACT.
Other Precautions:NONE REQUIRED IN NORMAL USE. GENERAL VENTILATION IS
EXPECTED TO BE ADEQUATE. WEAR PROTECTIVE GLOVES, CHEMICAL SPLASH
GOGGLES. AND EYE BATH, SAFETY SHOWER.
Exposure Controls
Respiratory Protection:NONE REQUIRED IN NORMAL USE. IF PERSONNEL
EXPOSURE EXCEEDS EXPOSURE LIMITS, SELECT IN ACCORDANCE WITH 29 CFR
1910.134. NIOSH/MSHA APPROVED RESPIRATOR EQUIPPED WITH ORGANIC
VAPOR CARTRIDGE AND DUST/MIS T PRE-FILTER RECOMMENDED.
Ventilation:GENERAL (MECHANICAL OR NATURAL) VENTILATION IS EXPECTED TO
BE ADEQUATE FOR NORMAL USE.
Protective Gloves:BUTYL RUBBER.
Eye Protection:CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:EYE BATH, SAFETY SHOWER.
Work Hygienic Practices:NORMAL PERSONAL HYGIENE.
Supplemental Safety and Health
OBSERVE ALL REQUIREMENTS OF PLAN, COMPANY OR GOVERNMENT REGULATIONS.
KEEP OUT OF REACH OF CHILDREN
Chemical Properties
HCC:F6
Boiling Pt:B.P. Text:>450F,>232C
Vapor Pres:0.1MM
Vapor Density:>1
Spec Gravity:NONE SPECIFIED.
Evaporation Rate & Reference:<0.1
Solubility in Water:100%
Appearance and Odor:CLEAR, AMBER LIQUID WITH SLIGHT AMINE ODOR
Percent Volatiles by Volume:NONE
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:TEMPERATURES ABOVE 300C.
Hazardous Decomposition Products:BURNING CAN PRODUCE SMALL AMOUNTS OF
OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:TEMPERATURE ABOVE 300C.
Disposal
Waste Disposal Methods:INCINERATION, TREATMENT, OR LANDFILLING SHOULD
BE CARRIED OUT IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.